（Strictly adhering to literal translation principles, retaining professional terms and structural logic, suitable for commercial scenarios such as product manuals and foreign trade documents）
I. Pre-Use Preparation (Key Prerequisite to Avoid Safety Hazards)
1、Inspect Product ConditionAfter unpacking, confirm that the buoy body, inflation port, rope buckles, and wear-resistant coating are free of damage, air leakage, or cracks (focus on inspecting seams and valve surroundings);Verify that accessories are complete: inflation pump (electric pump is recommended for efficiency and labor savings), special repair kit, high-strength fixing rope, and hooks (if connecting other floating devices).
2、Select Appropriate Usage ScenariosSuitable Scenarios: Swimming pools, lakes, shallow coastal areas (safer when wave height ≤ 0.5m), dock edge protection, water party area division, fishing spot marking, etc.;Prohibited Scenarios: Deep-sea rough wave areas, rapids, ship navigation channels, and waters with sharp reefs/debris (to avoid puncturing the buoy).
3、Prepare Auxiliary ToolsInflation Tools: Prioritize using an electric pump matching the buoy’s valve (Aoqile products usually fit standard air nozzles); manual pumps are for emergencies;Fixing Tools: Choose based on water conditions — sandbags + ground stakes for beaches/shallow waters, anchor hooks (weight ≥ 2kg, adjusted according to water depth) for deep waters, and direct fixing to railings for dock areas;Safety Equipment: Users must wear life jackets; children must be under adult supervision at all times.
II. Core Operation Steps (Step-by-Step Practical Guide, Easy to Understand)
1、Inflation Process (Ensure Sufficient Buoyancy, Avoid Air Leakage)Unscrew the buoy’s inflation valve cap, and tightly connect the pump’s air nozzle (select the corresponding gear for electric pumps; press the nozzle firmly for manual pumps);Inflate until the buoy body is full and elastic to the touch (do not overinflate; reserve 5%-10% expansion space to prevent bursting due to high temperature or impact);After inflation, quickly close the valve and tighten the sealing cap (ensure both inner and outer caps are screwed tightly for the dual-seal design to prevent water seepage and air leakage).
2、Fixing Methods (Choose Based on Scenarios, Ensure Stability Without Drifting)Shallow Water/Beach Fixing: Tie one end of the fixing rope to the reinforced buckles on both sides of the buoy (use double symmetric buckles for even force distribution), and bind the other end to sandbags or ground stakes buried ≥ 30cm deep in the sand;Deep Water Fixing: Use a special anchor hook (recommended weight 3-5kg), connect it to the buoy via rope, and throw the anchor hook into the water bottom to ensure it embeds in the sediment;Dock/Swimming Pool Fixing: Directly tie the buoy rope to stable structures such as railings or pool ladders, leaving an appropriate length (avoid overly tight ropes pulling the buoy or overly loose ropes causing drifting).
3、Combined Use (For Multi-Buoy Linkage, Enhance Practicality)Area Division: Connect multiple buoys in series with ropes, spaced 2-3 meters apart, to enclose swimming areas, party zones, or no-entry zones (e.g., around underwater obstacles);Matching Other Floats: Can be combined with inflatable floating platforms, life rings, water sofas, etc., using hooks to connect buoy ropes to form a stable water leisure area (ensure connection points are secure to avoid detachment).
III. Usage Precautions (Safety First, Extend Product Lifespan)
1、Avoid Contact with Sharp Objects: Prohibit carrying sharp items such as keys and knives near the buoy; users must remove high-heeled shoes and slippers to prevent damaging the wear-resistant coating; 2、Control Load Capacity: A single buoy (diameter 1.2-1.5m) is recommended for 1-2 people (for auxiliary floating only; not for use as a standalone life-saving device); overloading is strictly prohibited to prevent sinking or damage; 3、Respond to Weather Changes: Immediately retrieve the buoy in case of strong winds, heavy rain, or thunderstorms to avoid being washed away or struck by lightning; provide proper shading during intense sun exposure to prevent material aging; 4、Supervision for Children/Beginners: Children must be accompanied by adults at all times; beginners are advised to use in shallow waters and not stray far from the shore;Regular Inspections: Check inflation status and fixing ropes every 1-2 hours during use; promptly address air leakage or loose ropes.
IV. Post-Use Storage Steps (Proper Maintenance, Extend Service Life)
1、Deflation and Cleaning: After use, untie the fixing rope, unscrew the buoy valve to deflate slowly (press the valve to accelerate air release, avoiding valve damage from rapid airflow); rinse the buoy surface with clean water to remove sand and salt (fresh water rinse required after seawater use to prevent corrosion), and dry the surface; 2、Folding and Storage: Once fully deflated, fold the buoy slowly from one end to the other (avoid hard folding or pressing to prevent seam cracking); fold into a compact size and place in a dedicated storage bag; 3、Storage Environment: Store in a cool, dry place; avoid direct sunlight, high-temperature and humid environments (e.g., inside cars, balcony exposure), and keep away from sharp objects and chemicals (e.g., disinfectants, gasoline).
V. Common Problem Solutions
1、Minor Air Leakage: Apply soapy water to the valve and seams to locate the leak; use the special glue and patch from the repair kit (ensure the surface is dry and clean before pasting, press for ≥ 10 minutes to fix); 2、Buoy Drifting: Check if the fixing method is secure; deepen the burial depth of ground stakes/sandbags for shallow waters, replace with heavier anchor hooks for deep waters, or increase the number of fixing ropes; 3、Valve Water Seepage: Retighten the sealing cap; if seepage persists, check for debris blocking the valve, clean it, and reseal (contact the manufacturer to replace valve parts if necessary).
